Release Time：2017-05-20 15:29:53
A lot of customers of Mutual-gain Machinery purchase jaw crushers. Especially as the common equipment in the stone crushing plant, the penetration rate of jaw crusher is very high. Then, the problem is appeared. How to prevent quick-worn bearings? And how to add butter, lubrication oil? I think it is necessary for us to explain for you.
After every 400 hours working, lubricants should be added. After every 2000 hours working, the spindle should be assembled and the bearing should be washed thoroughly. After 7200 hours working of the bearing, you need to exchange a new bearing. The precondition of the working time is the common working time without breakdown. Except the changing of the bearing, how to extend the bearing’s service time is also need us to study.
There are many bearings in the sand maker. And the lubrication is necessary for each parts. The lubrication are all different in different parts. Because the abrasion degrees are different, so the consumption of lubricating oil are also different. So the detailed lubrication should be judged by the detailed requirements.