【Feed Size】: 35-60mm 【Production Capacity】: 12-160t/h
【Application Areas】High-grade highway, railway, water conservancy, construction, cement, refractories, metallurgy, glass sand, concrete mixing plant, gravel field and other industries.
【Applicable Materials】: Pebbles, river pebbles, quartz sand, granite, basalt, iron ore, limestone, calcite, quartz stone, abrasive, refractory material, concrete aggregate and so on.
The new type sand maker is called the vertil shaft impact crusher. It has the function of crushing and shaping when crushing the stone to -5mm with more 85% for one time. The size of product is uniform and in good shape, which is in full compliance with national standards for building sand. The sand maker produced by Double-gain company is with characteristics high efficient and low consumption, low return on investment.
Low production costs with low power consumption
The small-sized product produced by the sand maker could be used as the raw material directly. It saved the cost and power consumption without shaping for the second time.
Good product shape with reasonable gradation
The repeated exchange between "stone-stone hitting" and "stone-iron hitting" caused the good product shape with reasonable gradation. The sand maker is suitable for artifical sand making and shaping with hight production effiency.
Long service time
The equipment can operation smoothly by advanced manfacturing technology.
The best crushing chamber impact angle design can reduce wear to the quick-wear parts and to extend the service time.
Small loss, easy maintenance
Quick-wear parts are made by high wear-resistant material. Small loss and long life reduce equipment maintenance costs.
Good-qualified spare parts
Hammer is made by with wear-resistant high-manganese steel with high impact resistance and toughness. The frame adopts advaced welding technology which guaraneteed the stable operation without vibrating.
Small dust pollution
Thin oil lubrication is adopted to prevent the abrasion for bearing parts caused by bad lubrication, which reduces the abrasion rate for spare parts.
The materials fall into impeller with high-speed rotation vertically. On the force of high-speed centrifugal, the materials strike to the other part of material in a high speed. After mutual impacting, the materials will strike and rub between the impeller and the casing and then be discharged straight from the lower portion to form a closed multiple cycles. Final product is controlled by screening equipment to meet the requirement.
It can make a circuit system with the screening equipment. The product with 20 mesh below could get after three time after processing in this circuit system. The stone do not contact with the metal parts directly, but hitting and crushing with the inner liners and by the heating between stones. So the the lifetime of the machine is enlength. The airflow circulation inside the vortex chamber eliminates dust pollution.
Model | max Feeding s (mm) |
Power (kw) |
Impeller rotating speed (r/min) |
Capacity (t/h) |
Overall diemension (mm) |
Weight (kg) |
HX-06 | 35 | 37-55 | 2000-3000 | 12-30 | 2500×1620×2600 | 5600 |
HX-07 | 45 | 55-75 | 1500-2500 | 25-55 | 2700×1760×2800 | 7600 |
HX-09 | 50 | 110-150 | 1200-2000 | 55-100 | 3900×2000×3070 | 12600 |
HX-10 | 60 | 150-180 | 1000-1700 | 100-160 | 4600×2350×3450 | 17300 |
Zhengzhou win-win Machinery Co., Ltd. can provide more than commonly used models of equipment stock, and the other company can also be customized according to customer demand for production. Technical specifications are subject to change without notice. Any change of technical data shall not be advised additionally. Online Consultation .
Contact Us
Address:Zhengzhou, China, Zhengzhou Xingyang Longgang Industry and Trade Park
Tel:+86-16638152578
Email:jason@cinaqc.com