【Feed Size】: ≤20-≤25mm 【Production Capacity】: 0.65-615t
【Application Areas】It is used for various ore stone and other grindable materail dry grinding or wet grinding in the cement, silicate products, new building materials, refractories, black and nonferrous metal processing and glass ceramics and other production industries.
【Applicable Materials】: Fly ash, limestone, quartz sand, aluminum powder, coal, steel slag, ore, potassium feldspar, iron ore, iron slag, aluminum slag, silicon carbide, alumina, coal gangue and so on.
Ball mill is key equipment for re-grinding after the material crushed by crushing equipment. Zhengzhou Multi-gain ball mill has the advantages of wear resistance, smooth operation, reliable performance and so on. According to your actual production requirements, all kinds of ore and other grinding materials can be ground in dry or wet way.
The liners can keep the orginal shape and reduce the deformation and abrasion in long-term working time by withstanding the huge impact force during production because of the advanced two-medium quenching process applied in liner production.
Realiable operation
Profile shifted gear can reduce the meshing sliding speed and sliding ratio, and improve the wear resistance and anti-gluing performance, and even improves hydrodynamic performance and lubrication state of the gear transmission, improve the reliability of the ball mill operation.
Wide application
Compared to the high-manganese steel liners in the market, the liners is sutiable for dry grinding, wet grindig and mix grinding for various stone by alloy steel liner.
The lifetime of bearing is long
The diameter of the hollow shaft is enlarged inside of the bearing part of ball mill. It extends the radial distance between the bearing and the feed and discharge screw barrel.
Bending resistance of gear is high
Ball mill applies the profile shifted gear, which gets rid of the phenomonen of tooth interference and strengthen the bending resistance up to twice as the common ones.
Low part consumption rate
The thin oil lubrication replaces the grease lubrication, to prevent poor lubrication acused by lacking oil. So that the friction coefficient of bearing and other parts to the lowest limit, reduced the loss rate greatly.
This ball mill is a horizontal type and tubular running device which has two warehouses. This machine is grid type and its outside runs along gear. The materials are transferred to the first grinding chamber uniformly through the hollow shaft screw by the feeding device. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. After the coarse grinding, the materail gets into the second grinding chamber by single-wall plate. There are plane liner and grinding balls, which would grind the materail by fuurther step. The ground materials are discharged through the discharging board thus the grinding process is finished.
| Model | Cylinder rotating speed （r/min） |
Ball load (t) |
Feeding size (mm) |
Discharging size (mm) |
Capacity (t/h) |
Power (kw) |
Weight (t) |
| Ф900×1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
| Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
| Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
| Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
| Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
| Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
| Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 22 |
| Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
| Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
| Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
| Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 56 |
| Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
| Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 54.5 |
| Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 61 |
| Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62.5 |
| Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
| Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 58 |
| Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 72 |
| Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 22-80 | 380 | 95 |
| Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 26-90 | 480 | 102 |
| Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | 按工艺条件定 | 630 | 149 |
| Ф3600×4500 | 17 | 90 | ≤25 | 0.074-0.4 | 按工艺条件定 | 850 | 169 |
| Ф3600×6000 | 17 | 110 | ≤25 | 0.074-0.4 | 按工艺条件定 | 1250 | 198 |
| Ф3600×8500 | 18 | 131 | ≤25 | 0.074-0.4 | 45.8-256 | 1800 | 260 |
| Ф4000×5000 | 16.9 | 121 | ≤25 | 0.074-0.4 | 45-208 | 1500 | 230 |
| Ф4000×6000 | 16.9 | 146 | ≤25 | 0.074-0.4 | 65-248 | 1600 | 242 |
| Ф4000×6700 | 16.9 | 149 | ≤25 | 0.074-0.4 | 75-252 | 1800 | 249 |
| Ф4500×6400 | 15.6 | 172 | ≤25 | 0.074-0.4 | 84-306 | 2000 | 280 |
| Ф5030×6400 | 14.4 | 216 | ≤25 | 0.074-0.4 | 98-386 | 2500 | 320 |
| Ф5030×8300 | 14.4 | 266 | ≤25 | 0.074-0.4 | 118-500 | 3300 | 403 |
| Ф5500×8500 | 13.8 | 338 | ≤25 | 0.074-0.4 | 148-615 | 4500 | 525 |
Zhengzhou win-win Machinery Co., Ltd. can provide more than commonly used models of equipment stock, and the other company can also be customized according to customer demand for production. Technical specifications are subject to change without notice. Any change of technical data shall not be advised additionally. Online Consultation .
Contact Us
Address：Zhengzhou, China, Zhengzhou Xingyang Longgang Industry and Trade Park
Tel：+86-16638152578
Email：jason@cinaqc.com
